如何拆下门锁圆筒，无钥匙|为什么钥匙陷入锁子|cnclathing.

导致钥匙粘在锁中，如何将卡住钥匙锁定在锁中？Youtuber Clksupplies对我们解释了两个原因，您可以从他的视频中查看更多详细信息。

1.松散的气缸盖

钥匙卡在门锁中的第一个原因是锁缸盖被松动。例如，锁定旋钮，常见于各种商业旋钮，杠杆和止血。它之间有一个细线，它的工作与不起作用而且作为锁定不断警告，背面的螺帽将作为整体移动。当发生这种情况时，当你试着拉出钥匙时，它不会去，因为插头实际上是在汽缸上稍微向上移动一点点，而且它不允许所有这些底部引脚上来。

从锁中获取卡住键的方法：所有您需要做的要修复它是握住手指并在拉键的同时按住键。一旦你这样做，你可以把气缸拿出来，翻转它，你需要做的就是推动一点棘手，拧紧那个螺帽。

在榫眼气缸背面，有两个螺钉和尾部。When you operate a mortise cylinder in one of these doors, the tailpiece is actually what’s moving the latch mechanism back and forth, that puts a lot of pressure on that little tiny tailpiece held on by those two screws, and over time, a mortise cylinder that’s worked perfectly fine, all of a sudden the key gets stuck and you can’t get it pulled out. Most of the time, it’s just going to be because the two screws that hold the tailpiece on are a little loose, not allowing the key to actually come out.

从锁中获取卡住键的方法：要获得钥匙，你真正需要做的就是用你的一个手指或你的手指握住插头的前部，然后只拉开钥匙。一旦你有了关键，你想把榫眼气缸从门口拿出来，你将拧紧那些背面拿着尾羽的螺钉。

2. Mac超出范围

现在，这是当您在重新调整项目中间时会发生的原因。When a key stuck in the lock in the middle of a rekeying project, most likely your MACS (Max Adjacent Cut Specification) is out of factory specs, which means the cuts between the spacing are too extreme and it doesn’t leave enough space on the key in order for it to work properly. If you have like a number one depth, next to a number nine depth, the distance between the two, the traveling inside the cylinder for the top pin, the spring, and the bottom pin to come up and down is going to be too great and it’s not going to allow the key to coming out. It’s going to make it stuck in the door lock. It’s the same thing that can happen also with those cuts. It’s kind of a two-sided problem, you want to avoid it, make sure you’re familiar with it and you don’t break that rule.

从锁中获取卡住键的方法：如果你发现自己在那种情况下，你就必须像盖帽一样，锁的顶部或你要散发它，做一些东西来解决这个问题。现在，另一个小方面，这个领域的一点奖金原因是，如果你不检查顶部引脚或主销。如果你有太长的顶部引脚，或者你有额外的主销，那也可以导致你的问题，而不是让那个钥匙出来。确保您正在使用主钉键权威机获取那些主引脚，如果您仍然遇到问题，则要检查您正在使用的顶部引脚的大小。